Use and characteristic:
1、 Non-oil self-lubricating bearings are qualified to improve the application life and abrasion resistance of the coupling shaft, as well as reduce energy consumption.
2、Circuitry for the converter plus PLC,not only continuously variable transmission,the machine can work in automatic detection of the fault condition shutdown.
3、Using pneumatic air clutch to start the current,brake smoothly,except to move the slider or the outside could stop time to stop after the death,to provide maximum room for maneuver.
4、In order to decrease the pollution of hot-oil gas spray to the working environment, closed guard is designed and developed.
5、The machine set pressure oil line protection devices to ensure that all parts of the machine running the full lubrication. Set air way pressure protection device, overload protection of the machine, improve mold life.
6、Make sure the machine can be tested in convenience, then, for the security of the staff, building safety protection door and teaching the operators  to carry  out standard operation are also of great importance.



Main Technical Parameters of SJBF Series 2,3-Station
Cold Forging Machine.


Model

Unit

SJBF-42S

SJBF-63S

SJBF-83S

SJBF-83L

SJBF-103S

Forging station

No.

2

3

3

3

3

Forging force

kgs

15,000

38,000

65,000

65,000

80,000

Max cut-off dia.

mm

Φ5

Φ8

Φ10

Φ10

Φ12

Max cut-off length

mm

55

85

85

135

110

Speed Range

pcs/min

260-300

160-280

140-250

110-180

120-220

P.K.O Stroke

mm

10

12

20

16

15

K.O.Stroke

mm

50

75

68

115

85

Main slide stroke

mm

100

110

106

192

150

Main motor

kw

5.5

11

15

18.5

22

Cut-off-die size

mm

Φ20*30L

Φ30*45L

Φ53*56L

Φ30*50L

Φ45*59L

Punch die size

mm

Φ32*60L

Φ40*90L

Φ45*95L

Φ45*140L

Φ53*115L

Main die size

mm

Φ38*60L

Φ50*85L

Φ60*80L

Φ60*150L

Φ75*108L

Die pitch

mm

48

60

70

70

90

Machine dimension(L*W*H)

cm

301*112*111

320*200*150

360*220*180

450*220*200

410*250*190

Machine weight (Approx)

kgs

3,000

7,500

10,000

14,000

14,000

Normal bolt size

mm

M4

3-6

5-8

5-8

6-10

Shank length of blank

mm

10-50

8-65

10-60

20-110

15-70




Main Technical Parameters of SJBF Series 2,3-Station
Cold Forging Machine.


Model

Unit

SJBF-103L

SJBF-133S

SJBF-133L

SJBF-163S

SJBF-203L

Forging station

No.

3

3

3

3

3

Forging force

kgs

80,000

120,000

120,000

200,000

350,000

Max cut-off dia.

mm

Φ12

Φ15

Φ15

Φ18

Φ22

Max cut-off length

mm

195

145

250

200

240

Speed Range

pcs/min

85-160

90-160

60-110

70-120

50-80

P.K.O Stroke

mm

15

30

30

40

50

K.O.Stroke

mm

165

115

230

170

220

Main slide stroke

mm

280

200

350

260

346

Main motor

kw

22

30

30

55

75

Cut-off-die size

mm

Φ45*59L

Φ63*69L

Φ55*70L

Φ60*90L

Φ75*120L

Punch die size

mm

Φ53*112L

Φ60*130L

Φ60*179L

Φ75*185L

Φ90*215L

Main die size

mm

Φ75*200L

Φ86*135L

Φ86*265L

Φ100*190L

Φ125*240L

Die pitch

mm

90

98

110

120

140

Machine dimension(L*W*H)

cm

570*250*230

460*260*200

780*260*270

650*290*250

760*300*300

Machine weight (Approx)

kgs

19,500

19,500

31,000

36,000

55,000

Normal bolt size

mm

6-10

8-13

8-13

10-18

12-22

Shank length of blank

mm

25-160

20-110

70-210

20-160

25-210



 

 

Main Technical Parameters of SJBF Series 4-Station
Cold Forging Machine.


Model

Unit

SJBF-44S

SJBF-64S

SJBF-84S

SJBF-104S

SJBF-104L

Forging station

No.

4

4

4

4

4

Forging force

kgs

15,000

45,000

75,000

85,000

85,000

Max cut-off dia.

mm

Φ5

Φ8

Φ10

Φ12

Φ12

Max cut-off length

mm

55

100

110

135

190

Speed Range

pcs/min

250

140-250

120-220

95-180

80-150

P.K.O Stroke

mm

10

15

26

30

30

K.O.Stroke

mm

45

85

100

115

170

Main slide stroke

mm

100

136

140

190

280

Main motor

kw

11

15

22

30

30

die size

mm

Φ20*30L

Φ30*45L

Φ35*50L

Φ45*59L

Φ45*59L

Punch die size

mm

Φ32*60L

Φ40*90L

Φ45*115L

Φ53*115L

Φ53*115L

Main die size

mm

Φ38*60L

Φ50*110L

Φ60*120L

Φ75*135L

Φ75*185L

Die pitch

mm

48

60

80

94

94

Machine dimension(L*W*H)

cm

260*170*130

350*200*170

420*230*190

450*260*210

520*260*230

Machine weight (Approx)

kgs

5,000

10,000

14,000

18,000

21,000

Normal bolt size

mm

2-4

3-6

5-8

6-10

6-10

Shank length of blank

mm

10-45

10-70

15-77

15-110

20-160



 

Main Technical Parameters of SJBF Series 4-Station
Cold Forging Machine.


Model

Unit

SJBF-134S

SJBF-134L

SJBF-134LL

SJBF-164S

SJBF-164LL

SJBF-164UL

Forging station

No.

4

4

4

4

4

4

Forging force

kgs

120,000

130,000

130,000

220,000

220,000

230,000

Max cut-off dia.

mm

Φ15

Φ15

Φ15

Φ18

Φ18

Φ23

Max cut-off length

mm

145

200

300

200

350

510

Speed Range

pcs/min

100-160

75-130

50-90

70-110

40-70

35-50

P.K.O Stroke

mm

30

40

40

45

45

60

K.O.Stroke

mm

115

170

280

170

320

510

Main slide stroke

mm

200

270

380

260

490

670

Main motor

kw

30

37

37

55

55

75

die size

mm

Φ63*69L

Φ63*69L

Φ55*70L

Φ60*90L

Φ64*100L

Φ74*120L

Punch die size

mm

Φ60*130L

Φ60*130L

Φ60*229L

Φ75*185L

Φ75*185L

Φ75*250L

Main die size

mm

Φ86*135L

Φ86*190L

Φ86*305L

Φ100*190L

Φ100*345L

Φ100*510L

Die pitch

mm

98

110

110

120

120

120

Machine dimension(L*W*H)

cm

460*270*200

530*280*230

710*310*260

650*310*260

870*320*300

1000*320*340

Machine weight (Approx)

kgs

21,000

26,000

38,000

43,000

60,000

80,000

Normal bolt size

mm

8-12.7

8-14

8-14

10-16

10-16

12-20

Shank length of blank

mm

20-110

25-160

60-260

20-160

70-310

150-490

 

Main Technical Parameters of SJBF Series 4-Station
Cold Forging Machine.


Model

Unit

SJBF-204L

SJBF-204LL

SJBF-254SL

SJBF-254LL

SJBF-384L

Forging station

No.

4

4

4

4

4

Forging force

kgs

380,000

380,000

450,000

450,000

800,000

Max cut-off dia.

mm

Φ22

Φ22

Φ28

Φ28

Φ42

Max cut-off length

mm

240

360

260

380

450

Speed Range

pcs/min

50-90

40-65

40-80

35-60

30-50

P.K.O Stroke

mm

50

50

40

45

60

K.O.Stroke

mm

220

320

210

315

380

Main slide stroke

mm

346

496

330

510

570

Main motor

kw

75

75

110

110

200

die size

mm

Φ75*120L

Φ75*120L

Φ80*130L

Φ99*150L

Φ120*150L

Punch die size

mm

Φ90*215L

Φ90*215L

Φ120*270L

Φ120*270L

Φ145*320L

Main die size

mm

Φ125*240L

Φ125*345L

Φ140*250L

Φ148*345L

Φ190*450L

Die pitch

mm

140

140

160

160

216

Machine dimension(L*W*H)

cm

760*320*300

870*320*320

830*430*330

980*420*350

1100*520*400

Machine weight (Approx)

kgs

62,000

76,000

105,000

125,000

260,000

Normal bolt size

mm

12-20

12-20

14-27

14-27

20-40

Shank length of blank

mm

25-210

70-310

35-210

70-310

70-370



Main Technical Parameters of SJBP Series 5-Station
Cold Forging Machine.


Model

Unit

SJBP-65S

SJBP-85S

SJBP-105S

SJBP-135S

SJBP-135L

Forging station

No.

5

5

5

5

5

Forging force

kgs

48,000

85,000

98,000

145,000

145,000

Max cut-off dia.

mm

Φ8

Φ11

Φ13

Φ16

Φ16

Max cut-off length

mm

100

110

140

140

190

Speed Range

pcs/min

120-200

95-160

90-140

65-115

60-100

P.K.O Stroke

mm

20

26

30

30

30

K.O.Stroke

mm

80

90

115

115

165

Main slide stroke

mm

136

140

190

200

270

Main motor

kw

15

22

30

37

37

die size

mm

Φ30*45L

Φ35*50L

Φ45*59L

Φ63*69L

Φ63*69L

Punch die size

mm

Φ40*90L

Φ45*115L

Φ53*115L

Φ60*130L

Φ60*130L

Main die size

mm

Φ50*110L

Φ60*120L

Φ75*135L

Φ86*190L

Φ86*190L

Die pitch

mm

60

80

94

110

110

Machine dimension(L*W*H)

cm

350*220*170

420*250*190

450*280*210

550*300*220

560*290*220

Machine weight (Approx)

kgs

11,000

16,000

20,000

30,500

31,000

Normal bolt size

mm

3-6

5-8

6-10

8-14

8-14

Shank length of blank

mm

10-70

15-77

15-110

20-110

20-160



Main Technical Parameters of SJBP Series 5-Station
Cold Forging Machine.


Model

Unit

SJBP-165S

SJBP-205S

SJBP-205L

SJBP-205LL

SJBP-255L

SJBP-255LL

SJBP-305L

Forging station

No.

5

5

5

5

5

5

5

Forging force

kgs

220,000

380,000

380,000

380,000

480,000

480,000

600,000

Max cut-off dia.

mm

Φ18

Φ23

Φ23

Φ23

Φ32

Φ32

Φ36

Max cut-off length

mm

190

195

240

360

380

450

420

Speed Range

pcs/min

50-90

50-85

40-70

40-65

30-60

30-60

25-50

P.K.O Stroke

mm

40

50

50

50

50

60

60

K.O.Stroke

mm

170

180

220

325

320

410

380

Main slide stroke

mm

274

270

346

496

510

620

580

Main motor

kw

55

75

75

75

110

110

132

die size

mm

Φ75*100L

Φ75*120L

Φ75*120L

Φ75*120L

Φ99*150L

Φ99*150L

Φ118*180L

Punch die size

mm

Φ75*185L

Φ90*215L

Φ90*215L

Φ90*215L

Φ120*270L

Φ120*270L

Φ140*300L

Main die size

mm

Φ108*200L

Φ125*200L

Φ125*240L

Φ125*345L

Φ148*355L

Φ148*450L

Φ168*420L

Die pitch

mm

129

140

140

140

160

160

180

Machine dimension(L*W*H)

cm

650*340*260

720*350*290

760*350*300

870*340*320

1000*460*450

1200*470*500

1100*490*480

Machine weight (Approx)

kgs

52,000

75,000

75,000

95,000

140,000

155,000

200,000

Normal bolt size

mm

10-16

12-20

12-20

12-20

16-27

16-27

18-36

Shank length of blank

mm

20-160

25-152

25-210

100-305

60-310

120-390

70-370




Main Technical Parameters of SJBP Series 6-Station
Cold Forging Machine.


Model

Unit

SJBP-46S

SJBP-66S

SJBP-86S

SJBP-106S

SJBP-136S

SJBP-136L

SJBP-136LL

Forging station

No.

6

6

6

6

6

6

6

Forging force

kgs

30,000

53,000

95,000

115,000

148,000

148,000

148,000

Max cut-off dia.

mm

Φ7

Φ10

Φ13

Φ16

Φ18

Φ18

Φ18

Max cut-off length

mm

55

100

100

133

140

190

240

Speed Range

pcs/min

180

100-160

80-135

85-140

60-105

60-100

55-90

P.K.O Stroke

mm

10

26

26

30

30

40

40

K.O.Stroke

mm

50

85

90

115

115

170

210

Main slide stroke

mm

100

136

140

190

200

270

320

Main motor

kw

11

18.5

22

30

45

45

45

Cut-off-die size

mm

Φ24*30L

Φ32*45L

Φ42*60L

Φ52*75L

Φ58*80L

Φ58*80L

Φ58*80L

Punch die size

mm

Φ32*90L

Φ40*90L

Φ45*115L

Φ53*115L

Φ60*130L

Φ60*130L

Φ60*130L

Main die size

mm

Φ38*100L

Φ50*120L

Φ60*120L

Φ75*135L

Φ94*190L

Φ94*190L

Φ94*240L

Die pitch

mm

48

64

80

94

110

110

110

Machine dimension(L*W*H)

cm

260*180*130

350*240*170

420*270*200

460*300*210

460*310*220

560*310*220

620*310*250

Machine weight (Approx)

kgs

8,800

16,000

20,000

24,000

31,000

35,000

42,000

Max forging dia. on head

mm

Φ12

Φ14

Φ18

Φ22

Φ25

Φ25

Φ25

Normal bolt size

mm

2-4

3-8

5-10

6-12

8-14

8-14

8-14

Shank length of blank

mm

10-50

15-70

15-77

15-110

20-110

20-160

40-200


Main Technical Parameters of SJBP Series 6-7-Station
Cold Forging Machine.


Model

Unit

SJBP-166S

SJBP-206S

SJBP-206L

SJBP-256S

SJBP-256L

SJBP-276S

SJBP-137L

Forging station

No.

6

6

6

6

6

6

7

Forging force

kgs

280,000

420,000

420,000

520,000

520,000

760,000

152,000

Max cut-off dia.

mm

Φ23

Φ30

Φ30

Φ34

Φ34

Φ41

Φ20

Max cut-off length

mm

190

195

240

320

380

320

190

Speed Range

pcs/min

50-80

45-75

40-65

40-60

30-60

30-50

60-100

P.K.O Stroke

mm

40

50

50

50

50

50

40

K.O.Stroke

mm

170

180

220

280

320

280

170

Main slide stroke

mm

274

280

346

446

510

450

270

Main motor

kw

75

90

90

132

132

200

45

Cut-off-die size

mm

Φ75*100L

Φ82*130L

Φ82*130L

Φ109*150L

Φ109*150L

Φ129*180L

Φ60*80L

Punch die size

mm

Φ75*185L

Φ90*215L

Φ90*215L

Φ120*270L

Φ120*270L

Φ180*270L

Φ60*130L

Main die size

mm

Φ108*200L

Φ125*200L

Φ125*240L

Φ148*300L

Φ148*355L

Φ178*300L

Φ94*190L

Die pitch

mm

129

140

140

160

160

190

110

Machine dimension(L*W*H)

cm

650*360*260

730*330*280

800*380*320

900*480*420

980*470*350

950*520*450

600*350*230

Machine weight (Approx)

kgs

56,000

80,000

90,000

135,000

145,000

170,000

38,000

Max forging dia. on head

mm

Φ32

Φ44

Φ44

Φ50

Φ50

Φ60

Φ25

Normal bolt size

mm

10-18

12-22

12-22

16-28

16-28

20-30

8-14

Shank length of blank

mm

20-160

20-160

30-210

50-260

60-310

50-260

20-160


 

REMARKS:
1、The company keeps the right to revise above parameters,If there is any alterations,advance notice won t be given then.

2、The products' most applicable production speed is decided by the product shape,size and material.

3、Maximum material shearing diameter and product size listed in the table can be calculated according to medium carbon alloy steel,It is equal to 10.9 grade high intensity screw.